Posted 27 July 2012 - 07:11 PM
If I do only 1 of the 2 (copying OR making), it goes black which switches off the network , so my SSH connections are gone and the making (or copying) stops until I get it back on.
The second point seems some kind of battery saving thing; how can I switch that off?
And the first is just weird (or not?); anyone know what that is?
Posted 27 July 2012 - 07:14 PM
Also remember, that the Pandora only has 256mb ram and building some big application and copying stuff etc. Is a bit much maybe. Especially with the bit unstable wifi.
Posted 27 July 2012 - 09:17 PM
Could you describe in more detail what you are copying, which media from/to and what protocol? What is being built with cmake and where was cmake installed from?
The screensaver can be turned off with "xset s off", but it would be better if someone helped to reproduce and fix it, instead of turning off screensaver and moving on.
Posted 27 July 2012 - 09:46 PM
Posted 28 July 2012 - 08:46 AM
- using SCP to copy SuperZaxxonFinal.zip (as I now started doing things which might (and did make my device unusable)
- run ./bootstrap in the cmake source tree
Those at the same time make the device crash for me.
If I do one of them (doesn't matter which one), it doesn't crash but the network just disappears.
I now am going to reflash as I managed to make my device mostly unusable run opkg upgrade
Posted 28 July 2012 - 09:36 AM
I'm using one of the original CC 256mb Pandoras.
Typically I have swap enabled, Firefox open, two tabs, and either usb host enabled and tethered to my phone for internet, or I have wifi enabled and using my phone as a wifi hotspot.
Sometimes I also have uGet open and a couple of folders in Thunar.
I once had smplayer 2 open, but not playing anything and usb host enabled and connected to an external drive... I may or may not have had swap enabled at the time... If swap was on then I had been using Firefox previously and forgot to turn it off but I can't remember.
The hang happens when I leave my Pandora to go do something else... when I get back, usually about 20min later, either the screen is black and the unit is frozen, or the screen is lit, but everything is frozen. Only a hard reset gets me out of this.
Extremely annoying, and thankfully hasn't happened yet while in the middle of a download.
P.s. my swap file resides on a dedicated SD card in the right slot.
... so be carefull what you feed... o.o
We all want this project to mature, so we have to mature ourselves.
Posted 28 July 2012 - 09:56 AM
Posted 28 July 2012 - 10:39 AM
For me it happens when I overclock and leave the unit on and dont use it.
Just locks up.
and then when I did receive it, it couldn't play many of the emulators at a 'full and reasonable rate' according to my lawyer. Therefor the console does not match what I paid for and I am guaranteed to an amount based on what I paid and how long I waited.
^ I'd like to see that, I don't have television this is the only entertainment I have.
Posted 28 July 2012 - 10:45 AM
Does that fix it?
If yet, we have at least an idea where to look (well, notaz, that is )
Posted 28 July 2012 - 10:50 AM
4th time download:
$ md5 rootfs.img
MD5 (rootfs.img) = 2180aa90d82992ff52339fe9d9711205
The md5 of the rootfs.img here http://openpandora.o...emid=40&lang=en is definitely 2180aa90d82992ff52339fe9d9711205 and not the one in the rootfs.md5 file; I changed the file and installed; everything is working like a charm.
Posted 28 July 2012 - 12:28 PM
Posted 28 July 2012 - 12:28 PM
Posted 28 July 2012 - 12:42 PM
Yes, as stated in numerous posts, the md5 on the official rootfs is wrong right now. Ed needs to fix that.
Hopefully fixed now!
Posted 28 July 2012 - 03:17 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users